940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
-
Calibrate seat.
-
Check function.
Drive Gear to Seat Right Side, Change
Drive gear to seat right side, change
NOTE: When performing the following tasks, take care that the seat guide rails do not alter their position relative to one another, or it will not be
possible to replace the seat in the vehicle.
Remove:
Preparations
-
Remove battery negative lead and note any radio code.
-
Remove seat from vehicle. See: Service and Repair/Remove Seat From Vehicle
Location
-
Lay seat on its right side, on a clean sheet.
Removal
-
Remove brackets with the three motors. They are fixed with two screws on each side.
-
Remove clips which hold carpet to rear edge of seat.
-
Remove two outer drive gear retaining nuts.
-
Remove the two screws and locking clip.
Removal of drive gear
-
Slacken off drive gear from seat.
Removal of drive cables from gear
-
Slacken off dnve gear locking-plate retaining screws.