940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Replace:
Replacement
-
Replace upper drive cables and if necessarv potentiometer.
-
Screw down bracket.
-
Replace lower drive cables. Screw down bracket.
Pass in bracket
-
Feed upper bracket hook into hole marked with arrow.
Earlier models:
-
Reconnect connector
Tightening nut
-
Tighten nut which holds lower bracket to seatback frame.
Finishing
-
Attach rake adjuster into plastic holder. Retain the upper long cable with a cable clip or fix it firmly between rake adjuster and upholstery.
This is to avoid noise caused by cable striking against upholstery and trim.
-
Attach elastic retainer inside trim (if it has been slackened off).
-
Pull down trim and clip in place. Use new clips.
Replacement of seatback
-
Replace seatback on seat.