940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Remove the stay (cross bar) as per illustration. (four bolts)
2
Removing plastic flanges
Caution!
Eye protection should be worn when performing this step.
Carefully remove the plastic flanges of the bushings with a chisel or equivalent.
3
Removing bushings
Secure a 100 mm (4 inch) spacer between the frame rail and the control arm as per illustration.
Install the assembly tool as per Illustration and carefully press out the bushing.
4
Locating the new bushing