940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Take care to avoid damage to seal.
-
Press in drive shaft until snap ring engages in groove.
^
Check that ring is seated by pulling gently on CV joint.
Pull out wheel bearing housing and insert end of drive shaft in hub.
Reconnect components to wheel bearing housing
Reconnect:
-
link and bolt. Use new nut.
Torque: 80 N-m (59 ft.lbs)
-
support arm. Use new bolt.
Torque: 80 N-m (59 ft.lbs)
-
track rod, Use new bolt.
Torque: 80 N-m (59 ft.lbs)
Install: