940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Remove propeller shaft intermediate bearing mounting bolts Pull propeller shaft forward approx. 100 mm and allow shaft to rest on intermediate bearing
support.
Remove track rod bolt and unhook rod from wheel bearing housing
Remove:
-
nut on link mounting bolt in wheel bearing housing. Tap out bolt with brass drift. Release and remove compression tool.
Repeat operation at other side of car.
Slacken lower bolts on rear axle member
Slacken bolts about a half turn.
Remove:
-
front bolts and spacer sleeves