940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Wiper Motor: Service and Repair
Wiper Linkage Cable Replacement
Linkage removed:
-
Loosen nut retaining cable.
-
Remove cable.
-
Hook cable nipple onto link arm.
-
Wrap cable around pulley.
-
Tighten nut holding cable to link arm.
Torque: 3.5 Nm (2.6 ft.lb).
Tighten until any play between pulley and link arm disappears.
NOTE: Check that the correct cable has been fitted as per spare parts.
Apply grease to prevent against corrosion and noise.