940 SE L4-2320cc 2.3L SOHC Turbo VIN 87 B230FT (1991)
Make sure that the seal is in position between axle and wiper arm.
NOTE: Before installing cover panel, see that the motor arm and the link arm are dead in line with the mounting.
The motor should be in park position.
-
The torque for the axle nut/bolt should be 26/10 Nm (19.27/7.4 ft.lb).
-
The torque for the two screws (4) should be 22 Nm (16.2 ft.lb).
Make sure that the clips to the rear of the cover plate are correctly seated.
-
Adjust wipers.