C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
-
Install the new camshaft belt over the crankshaft pulley wheel.
-
Install the vibration damper.
Tighten the center nut to 180 Nm (133 lb.ft).
Use counterhold 999 5433.
Remove the counterhold and install new screws. Tighten the screws to 25 Nm (18 lb.ft). Angle tighten 30 degrees.
Then Install The New Belt In The Following Order:
1. Idler pulley.
2. Intake camshaft pulley.
3. Exhaust camshaft pulley.
4. Water pump.
5. Belt tensioner.
Tighten The Timing Belt
This adjustment is to be made with a cold engine.