C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Water Pump: Procedures
Coolant Pump, Replacing
NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Removing The Coolant Pump
CAUTION: Remove the ignition key.
-
Remove the expansion tank cap.
-
Remove the splash guard under the engine.
-
Position a container under the engine drain cock. Drain the engine coolant.
Avoid skin contact with the coolant.
-
Transfer the container to the radiator draining tap. Drain off the remaining coolant.
-
Close the nipples.
-
Install the splashguard under the engine.
Position The Engine According To The Marking
Remove
-
the cross stay between the suspension turrets.
-
the servo reservoir and the expansion tank and place them on top of the engine.
WARNING: Ensure that no power steering fluid is spilled. Extremely flammable.