C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
Note that these are general instructions, variations can occur in practice.
Regard the examples shown and the procedures described as guidelines.
Open cavity cover/locking plate
For some housings a small, thin screwdriver can be used, for others no tool is required.
The secondary locking on this type of housing is released by setting the cavity cover/locking plate in the open position. There are two positions, open or
closed.
-
Lift up, push or unclip from the locking plate
A "click" can be heard when the plate unlocks and is in the open position.
Note! If the housing has a long, narrow locking plate check that it opens completely and not only along one edge. Work loose the locking plate
along one entire long side.
Other examples of cavity cover/locking plates