C70 L5-2.4L Turbo VIN 63 B5244T7 (2003)
More examples of housings with cavity cover/locking plate and procedures for opening them can be found in chapter Example 1 See: Connectors,
Repair/Connectors/Example 1 Example 2A See: Connectors, Repair/Connectors/Example 2A Example 2B See: Connectors,
Repair/Connectors/Example 2B Example 3 See: Connectors, Repair/Connectors/Example 3 Example 4 See: Connectors, Repair/Connectors/Example 4.
Proceed
To replace a cable terminal the next step is to remove the old cable terminal located in the housing.
-
Proceed to Cable terminals, different types See: Extracting the Cable Terminal From the Housing/Cable Terminals, Different Types Primary
locking in general See: Extracting the Cable Terminal From the Housing/Primary Locking In General Using terminal removal tools See:
Extracting the Cable Terminal From the Housing/Using Terminal Removal Tools When the cavity opening has two extraction grooves See:
Extracting the Cable Terminal From the Housing/When the Cavity Opening Has Two Extraction Grooves Cavity opening with one extraction
groove See: Extracting the Cable Terminal From the Housing/Cavity Opening With One Extraction Groove Housing with half-open contact side
See: Extracting the Cable Terminal From the Housing/Housing With Half-Open Contact Side Housings with square cavity openings See:
Extracting the Cable Terminal From the Housing/Housings With Square Cavity Openings Housings with round cavity opening See: Extracting
the Cable Terminal From the Housing/Housings With Round Cavity Opening Single terminal housings See: Extracting the Cable Terminal From
the Housing/Single Terminal Housings.
Seal SWS and Plug
Seal sws and plug
Seal sws for cable terminals
Caution! Always use the correct size of seal to match the cable.