volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 6844 > < Procedures|Page 6842
Page 3
background image

Finishing 

-

Top up the oil level in the servo reservoir. Bleed the system.

-

For the correct oil quality, see the specifications.

WARNING:  Avoid skin contact with the oil.

-

Repeatedly turn the steering wheel to full lock. Top up the oil if necessary.

-

Lower the car.

-

Apply the parking brake. Start the engine.
A Turn the steering wheel slowly to the right. Hold on full lock for 2 seconds 
B Turn the steering wheel slowly to the left. Hold on full lock for 2 seconds.

Repeat operations A and B approximately 10 times.

Replacing the Return Hose

Replacing The Return Hose 

NOTE:  As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information in the illustrations is always correct.

Removing 

Procedures|Page 6844 > < Procedures|Page 6842