C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Remove the exhaust pipe bracket and twist it to one side.
-
Unhook the muffler from the rubber mountings.
-
Position a lifting table (minimum capacity 500 kg) under the sub-frame so that the engine/transmission unit cannot twist or slide.
-
Apply the lifting table so that the load is taken off the sub-frame screws.
-
Remove the sub-frame screws together with the accompanying brackets and washers.
-
Carefully lower the engine/transmission unit approximately 90 mm.
Removing the bushings for the sub-frame
Use tool 999 5457.
Install
-
the counterhold (1) on the upper side of the bushing
-
the cutting sleeve (3) and the screw with nut (6) from underneath.
Tighten the cutting sleeve until it stops against the counterhold. The cutting sleeve is now fixed in the bushing.
Remove the counterhold.
