C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Position the threaded plate (2) above the bushing. Install the spacer sleeve (5) and the screw with the nut (6) from underneath.
Pull out the inner section of the bushing using the cutting sleeve.
Knock out a piece of the flange on the outer section of the bushing. Use a screwdriver and a hammer.
NOTE: Do not use a cold chisel.
Split the outer sleeve using the screwdriver where the section was tapped out. (The insert illustration shows a split sleeve.)
Pry out the bushing. Use the screwdriver.
