volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 30312 > < Procedures|Page 30310
Page 9
background image

-

Fold the backrest or position the backrest in the forward folded position.

-

Slacken off tension in lumbar support.

-

Remove the five half moon clips at the bottom edge of the backrest.

-

Remove the upholstery at the lower edge of the protective pad.

Removing the middle section of the backrest upholstery 

-

lumbar support knob.

-

side piece, pull straight out.

-

handle.

-

side piece, angle and pull down.

-

the plastic sheet in the pocket inside the upholstery.

-

Remove the upholstery to the first cross channel. Cut the two half moon clips on the long channel.

Release the two pieces of elastic on the inside of the rear of the backrest.

Removing the upper section of the backrest upholstery 

-

the head restraint.

-

half moon clips on the inside of the rear of the backrest.

-

the rest of the half moon clips on the front.

-

Pull off the backrest upholstery.

Install: 

Procedures|Page 30312 > < Procedures|Page 30310