volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 30313 > < Procedures|Page 30311
Page 10
background image

-

In reverse order.

-

Position and measure the upholstery before securing.

Use special pliers, P/N 115 8962 to secure the half moon clips

NOTE:  When hooking the upholstery to the clips, ensure that the steel rod is not pulled up out of the foam padding. Also ensure that the steel rod
in the upholstery does not bend too much. There is a risk of lasting deformation. This will result in loose and unattractive upholstery.

Seat Cushion Upholstery

Seat cushion upholstery 

Special Tools:  115 8962

Removing the upholstery from the seat frame 

-

the front seat from the car.

-

the side panel.

-

the half moon clips on the sides of the underside of the cushion.

-

the half moon clips at the front edge of the cushion.

Procedures|Page 30313 > < Procedures|Page 30311