C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Brake Caliper: Procedures
Installing shims
Special tools:
999 2917 EXTRACTOR See: Tools and Equipment/999 2917 Extractor
999 2809 PRESS TOOL See: Tools and Equipment/999 2809 Press Tool
Introduction, installing shims
A kit with a new type of shim has been developed for the rear brake calipers. The kit P/N is 272272-6 (kit with 4 shims).
Note! Kit 272272-6 must not be installed in cars with brake caliper 3524365-8 and 3524366-6. The piston has a "step" (lowered 180°) on the
mating surface with the brake pad.
Removing the rear wheels
Remove the rear wheels.
Removing the retainer spring
Push out the split pins with a 3 mm drift.
Pull out retaining spring.
Removing the brake pads
