C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Then turn the eccentric back so that the needle reaches the marked position corresponding to the relevant temperature.
-
Remember to hold the center screw secure at the same time.
-
At 20 degree C the needle must be centered in the window.
-
Hold the eccentric secure and tighten the center screw to 20 Nm (15 lb.ft).
-
Check that the indicator is in the correct position.
-
If the indicator is not in the correct position, a new alignment must be carried out.
-
Remove:
-
the camshaft adjustment tools.
-
the crankshaft stopper.
-
Install the plug with a new sealing washer. Tighten to 40 Nm (29 lb.ft).
Checking The Markings And Belt Tension