C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Check:
-
Press the belt to check that the indicator on the tensioner moves easily.
-
Install the upper timing belt cover.
-
Turn the crankshaft two turns and check that the markings on the crankshaft and camshaft pulley correspond.
-
Check that the indicator on the belt tensioner is within the marked area.
Reinstall
Install:
-
the front camshaft belt cover. Tighten to 12 Nm (8.8 ft.lb).
-
the upper camshaft belt cover. Tighten to 8 Nm (6 lb.ft).
-
the auxiliaries belt.
-
the cable duct. 3 nuts.
-
the expansion tank.
-
the servo reservoir.
Wipe clean.
Check the level and top up as necessary.
NOTE: Check that the hoses are correctly positioned.
-
the starter motor.
-
Tighten the screws at the transmission to 40 Nm (29 lb.ft).
-
Tighten the support bracket screw to 25 Nm (18 lb.ft).
