C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Lift the duct away from the screws.
-
the auxiliaries belt.
-
the front camshaft belt cover.
Position the engine according to the marking
Raise the car.
Remove:
-
the right front wheel.
-
the nuts for the cover in the fender liner.
Install the upper camshaft belt cover.
Turn the crankshaft clockwise until the markings on the crankshaft and camshaft pulley correspond.
Turn the crankshaft a further 1/4 of a turn clockwise, then back counter-clockwise until the markings correspond.
The markings are illustrated.
Remove the upper camshaft belt cover.
Removing the camshaft belt
Slacken off the belt tensioner.
Slacken off the belt tensioner center screw slightly.