C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Remove the blind cover plug and the sealing washer.
-
Turn the crankshaft clockwise slightly to avoid the camshaft adjustment tool being in the wrong position.
-
Install camshaft adjustment tool: 999 5451.
-
Ensure that the camshaft adjustment tool reaches down to the cylinder block.
-
Turn the crankshaft back counter-clockwise until it stops against the drift.
-
Check that the marking on the crankshaft timing gear pulley corresponds with the marking on the oil pump.
Reinstall
Install The Variable Valve Timing (VVT) Unit With The Toothed Belt Pulley:
-
Slacken off, but do not remove, the screws which secure the timing gear pulley to the variable valve timing (VVT) unit.
-
Press the timing gear pulley and variable valve timing (VVT) unit on to the camshaft.
-
Install the center screw which secures the variable valve timing (VVT) unit to the camshaft. Do not tighten yet.
-
Install the upper camshaft belt cover.
-
Turn the timing gear pulley clockwise until the screws at the oval holes are in the limit position.
-
Continue turning clockwise until the timing gear pulley marking is 1 cog before the marking on the upper timing cover.