C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Check that the timing gear pulley is still in the limit position in the oval holes.
-
Tighten the center screw in the variable valve timing (VVT) unit to 120 Nm (88 lb.ft).
-
Check that the variable valve timing (VVT) unit does not rotate when tightening.
-
Install the center plug. Tighten to 35 Nm (26 lb.ft).
Install The Timing Gear Pulley On The Intake Camshaft:
Install the timing gear pulley on the intake camshaft with two screws, but do not tighten.
Check that the markings on the timing gear pulley and the upper timing cover correspond.
Installing The Timing Belt
-
Install the timing belt:
-
Tighten the center screw on the camshaft belt tensioner to 5 Nm (4 lb.ft).
-
Turn the variable valve timing (VVT) unit clockwise until stop.
-
Hold the variable valve timing (VVT) unit secure at the clockwise limit position when the belt is being installed.
-
As shown in figure.
Install The Belt In The Following Order:
