volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 26344 > < Procedures|Page 26342
Page 6
background image

Place a screwdriver between the damper motor and the damper roller.
Remove the damper motor by wiggling carefully with the screwdriver.

Installing damper motor air distribution 
Install the damper motor.

Note! Fit the bevel on the damper motor's output shaft in the damper roller. 

Plug in the damper motor air distribution's connector.
Install knee bolster, if any.

Left-hand drive car 

Procedures|Page 26344 > < Procedures|Page 26342