C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Warning! Protective gloves and protective goggles should be used for the following operations because of the risk of fuel spillage.
Remove cover over coolant temperature sensor, overheat protection thermostat and fuel line quick-release connector.
Remove coolant temperature sensor and overheat protection thermostat holder.
Remove the coolant temperature sensor from the heat exchanger by pulling it straight out.
Disconnect the ground terminal on the heat exchanger.
Remove the outside temperature sensor from the heat exchanger.
Remove the holder for the quick-release connector between the fuel line and nozzle pipe.
Disconnect the quick-release connector between the fuel line and nozzle pipe.
Heat exchanger and fan shroud
