volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Blower Motor > < Auxiliary Heater Element|Service and Repair
Page 2
background image

Installing 

Installing components 

Outside temperature sensor: 

Reinstall outside temperature sensor in mounting.
Reconnect outside temperature sensor connector.

Glow plug: 
Screw glow plug in, tighten to 15 Nm .
Reconnect glow plug electrical terminal
Reinstall heater according to Moving the heater to its service position  See: Service and Repair/Procedures.
Check so that no DTCs are stored during the repair.

Blower Motor > < Auxiliary Heater Element|Service and Repair