C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
First read section Before starting work on the receiver/drier or suction pipe
-
Disconnect the battery negative lead
-
Drain the refrigerant from the system
-
Remove the fresh air intake for the control module box.
Removing
-
Disconnect the quick-release connector for the evaporator by the receiver/drier using a quick-release connector tool 999 5472
-
Unscrew the receiver/drier bracket screw.
-
Raise the car
-
Remove the air baffle between the spoiler and the frame member
-
Disconnect the pipe coupling for the compressor (the suction pipe)
-
Remove the receiver/drier, suction pipe and bracket by lifting it where it is hooked into the side member
-
Remove the receiver/drier and suction pipe from the bracket When replacing suction pipe:
-
remove the suction pipe from the receiver/dryer.
NOTE: Note the position of the suction pipe relative to the receiver/drier.