volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 26697 > < Climate Control ECC/MCC/Standard|Page 26694
Page 1
background image

Ambient Temperature Sensor / Switch HVAC: Procedures

Replacing Outside Temperature Sensor (Electronic Climate Control) 

Remove: 

-

Ignition off

-

Remove the glove compartment.

-

Remove the soundproofing panel.

-

Remove the outside temperature sensor. Twist the sensor counterclockwise and pull it straight out

-

Disconnect the sensor connector.

Install 

-

In reverse order.

Finishing 

-

Check that the temperature sensor is working by reading off the outside temperature

-

Check that no diagnostic trouble codes (DTCs) were stored during fault-tracing.

Procedures|Page 26697 > < Climate Control ECC/MCC/Standard|Page 26694