volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Procedures|Page 26731 > < Fault-Tracing Information|Page 26728
Page 1
background image

Solar Sensor: Procedures

Removing Sun Sensor (ECC) 

-

Ignition off.

-

Remove sun sensor by inserting a weatherstrip tool on the side of the sensor and carefully prying it up.

-

Lift up sensor and disconnect connector.

Installing sun sensor (ECC) 

-

In reverse order.

Finishing: 

-

Check that the fault has been remedied by reading off sun intensity. Expose the sun sensor to light so that the value changes.

Procedures|Page 26731 > < Fault-Tracing Information|Page 26728