C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Location Of Components (Solenoids)
Note! Measurements should be taken at approx. 20°C.
Solenoid SLT, SLS and SLU
Measure between the two pins in the solenoid connector.
Correct value: 5.0-5.6 ohms.
If the value for any of the solenoids SLT, SLS or SLU is incorrect
Replace the control system as described in Replacing the control system.
The control system is calibrated together with the solenoids.
Replacing solenoids S1-S5
Location Of Components (Solenoids)
Remove the solenoid bolt and remove the solenoid from the control system.
Oil the O-ring of the new solenoid with ATF.
Fit the solenoid. Tighten the bolt to 7 Nm .
Supplementary work