volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Solenoids/Control System, Replacing|Page 22310 > < Solenoids/Control System, Replacing|Page 22308
Page 3
background image

Plug in the solenoid connectors.
Refit as described in  Replacement of control system cable harness with oil temperature sensor See: Sensors and Switches - Transmission and
Drivetrain/Sensors and Switches - A/T/Transmission Temperature Sensor/Switch/Service and Repair/Replacement Of Control System Cable Harness
With Oil Temperature Sensor  and  Replacement of control system cable harness with oil temperature sensor See: Sensors and Switches - Transmission
and Drivetrain/Sensors and Switches - A/T/Transmission Temperature Sensor/Switch/Service and Repair/Replacement Of Control System Cable Harness
With Oil Temperature Sensor.

Replacing the control system 

Preparation 
Remove, see  Replacement of control system cable harness with oil temperature sensor See: Sensors and Switches - Transmission and Drivetrain/Sensors
and Switches - A/T/Transmission Temperature Sensor/Switch/Service and Repair/Replacement Of Control System Cable Harness With Oil Temperature
Sensor.

Remove: 

-

solenoid valve connectors

-

bolt for oil temperature sensor holder. Detach the sensor from the control system

-

cable harness from holder on control system.

Bend aside the cable harness.

Removing the control system 

Solenoids/Control System, Replacing|Page 22310 > < Solenoids/Control System, Replacing|Page 22308