volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 22424 > < Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 22422
Page 6
background image

Ensure that the rubber seal is in position.
Install the cable clamps around the cable harnesses and the rubber seal.
Check that the rubber gasket is in place on the upper section of the connector.

Connect the connector to the transmission 

Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 22424 > < Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 22422