C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
-
Clean area around boot. Remove clamp
-
Take care to avoid damage to boot. Push boot back.
-
Heat spacers in warm water for a few minutes to facilitate mounting on steering rack
-
Press spacers onto rack
-
Flat side of spacer should face steering gear housing.
-
Press spacer against inner ball joint on tie rod.
-
Reinstall boot
-
Ensure that rubber sealing strip (A) is in position on steering gear.
-
Reinstall boot on steering gear. Use new steel clamp, P/N 1387840-0. Included in kit.
NOTE: Hose clip must not be used.
