volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing the Gear Selector Assembly|Page 22960 > < Replacing the Gear Selector Assembly|Page 22958
Page 16
background image

Pull out the catch. Hold it out while installing the gear selector. This is so that the push rod locates correctly.
Pull up on the boot on the knob so that it engages in the locking.
Pull up the locking sleeve on the gear selector knob.
Check that the gear positions are working.

Installing the center console 
See Replacing the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Replacing
Center Console.

Replacing the Gear Selector Assembly|Page 22960 > < Replacing the Gear Selector Assembly|Page 22958