volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacing the Gear Selector Assembly|Page 23006 > < Replacing the Gear Selector Assembly|Page 23004
Page 30
background image

Note! The automatic transmission has one gear selector cable while the manual transmission has two cables. 

Ensure that the gear selector cable is locked in position before installing the blue clip. Press the clip into place as illustrated.

Check that the clip is positioned in the groove as illustrated.

Installing the air cleaner (ACL) housing 
Install the air cleaner (ACL) housing, including all hoses and electrical terminals.

Installing the front wheels 
Install the front wheel.

Gaiter, Gear Selector, Replacement

Gaiter, gear selector, replacement 

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
 

Removal 

Removing the gear selector knob 
Remove the gear selector knob in accordance with: Gear selector knob, replacing See: Gear Selector Knob, Replacing (standard) or in accordance with:
Gear selector knob, Geartronic, replacement See: Gear Selector Knob, Geartronic, Replacement (geartronic).

Removing the panel 

Replacing the Gear Selector Assembly|Page 23006 > < Replacing the Gear Selector Assembly|Page 23004