C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Remove the bearing cap. Pull out the inner section of the drive shaft and fold out the spring strut at the same time.
Note! Take care not to damage the seal in the transmission.
Install the seal plug 999 5488 PLUGS See: Tools and Equipment/999 5488 Plugs in the gearbox.
Let the drive shaft rest on the sub/frame. Secure the drive shaft end with tape by the pipe bend.
Right-hand drive cars only:
Let the drive shaft end rest temporarily on the oil pipe.
Remove the screw, front engine pad/sub-frame