volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removing|Page 23092 > < Removing|Page 23090
Page 19
background image

Install:

-

The front cover. Press it into position at the front. Press it forward and upward at the rear so that cover guide is seated in its slot. Install the screws

-

The wheel. Lubricate the hub's guide for the rim using rust inhibitor 1161030-0. Fit the screws by hand. Now tighten crosswise. Torque:  110 Nm .

Note! Also see  Tightening the wheel studs See: Maintenance/Wheels and Tires/Wheel Fastener/Service and Repair. 

Removing|Page 23092 > < Removing|Page 23090