volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Removing|Page 23143 > < Removing|Page 23141
Page 17
background image

Install:

-

The bracket for the brake line /ABS cable (both sides)

-

the ABS sensor in the stub axle. Clean the sensor with a soft brush.

Note! Ensure that the sensor seat is absolutely clean. 

Tighten the sensor. Torque  10 Nm 

-

The plastic nuts (both sides) and Torx screws for the wheel arch liner (left-hand side, early design).

Removing|Page 23143 > < Removing|Page 23141