volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 23240 > < Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 23238
Page 8
background image

Tap the ball joint free. Use a socket between hammer and ball joint.

Note! The inside diameter of the socket must be larger than the outside diameter of the cover to avoid damaging the cover. 

Spray rust remover on the ball joint once again.

Removing the ball joint/link arm from the stub axle 

Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 23240 > < Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 23238