C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Use centering tool 999 5663 Centering tool See: Tools and Equipment/999 5663 Centering Tool. The drift is modified as described in the Workshop
Guide. The conversion kit is included.
Remove the cone from the centering tool.
Install the centering tool in the flywheel center as far in as possible.
Use a wrench as a counterhold. Tighten the outer socket so that the drift expander locks the centering tool.
Feel to see that the centering tool is secured in the crankshaft.
Installing the clutch driven plate
Caution! Turn the slightly longer part of the clutch driven plate hub in towards the flywheel. There is a marking on the clutch driven plate.
Install the cone on the centering tool. Tighten the cone by hand and secure the clutch driven plate.
Note! Tightening tools must not be used on the cone or damage may be caused to the clutch driven plate.
Installing the tools on the clutch
Install counterhold 999 5677 Counterhold See: Tools and Equipment/999 5677 Counterhold. See Aligning the counterhold for automatic clutch
adjustment.
Install compression tool 999 5662 Compression tool See: Tools and Equipment/999 5662 Compression Tool. See Installing the compression tool.
First tighten the center screw on the compression tool to light contact. Then compress the clutch.
