C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Constant Velocity Joint: Procedures
Adapting A Drift
Adapting a drift
To facilitate removal of the CVJs, grind a drift as shown in the illustration. Rounding the lower edge (R) means that the drift will not catch in the drive
shaft circlip groove. The sharper angle (approx. 60°) means that drift has a greater surface contact with the inner ring.
Greasing and Installation
Greasing and installation
Greasing and installation
Lubricate the constant velocity joint thoroughly.
