C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Flywheel: Procedures
Replacing The Flywheel
NOTE: As the illustrations in this service information are used for different model years and/or models, some variation may occur. However, the
essential information is always correct.
Replacing The Flywheel
Special Tools: 999 5112, 999 5678.
Removal
Preparations
-
Remove the transmission
-
Remove the clutch
NOTE: The illustrations display a dual mass flywheel, but the method is the same for the single mass flywheel.
Removing The Flywheel
-
Remove the engine speed (RPM) sensor with the bracket. Place it to one side.
-
Slacken off all the screws for the flywheel. Remove all the screws except for one.
-
Remove gear sector 999 5112.
-
Detach the flywheel from the crankshaft. Remove the remaining screw.
-
Remove the flywheel.
Checking The Crankshaft Seal
