C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Remove the nut for the cable duct. Lift the cable duct away from the screw.
Slacken off the screws for the gear-shift position sensor.
Rotate the gear position sensor so that the mark on the switch aligns with the groove on the tool. Tighten the screws for the sensor. Tighten to 25 Nm .
Remove the adjustment tool.
Installing the cable duct
Install the cable duct on the screw. Tighten to 25 Nm .
Install the lever on the control shaft. Tighten to 16 Nm .
Installing the gear selector cable
