volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 23592 > < Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 23590
Page 13
background image

Make sure that the five steering gear bolts and the collision guard bolt are unscrewed from the subframe.
Remove the anti-roll bar's clamp bolts (LH side). Undo the bolts on the RH side until only a few turns still hold them in place.
Tie the anti-roll bar to the steering gear as shown in the illustration.

Lowering the subframe 

Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 23592 > < Replacement Of Control System Cable Harness With Oil Temperature Sensor|Page 23590