C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Position engine lift 998 5972 JACK See: Tools and Equipment/998 5972 Jack under the LH side of the subframe.
Press the subframe up against the bodywork, fitting the steering gear bolts into the subframe at the same time.
Fit new bolts (M14) in the subframe. Oil the threads. Tighten the bolts to 105 Nm . Fit the support plate bolts at the same time.
RH side
Press up the subframe. Remove the old bolts and fit new ones in the same way as on the LH side. Remove the engine lift.
Finally, tighten the four subframe bolts to 120° .
Tighten the support plate bolts to 50 Nm .
Fitting steering gear/subframe components
