C70 Coupe L5-2.3L Turbo VIN 53 B5234T3 (2001)
Fit the control system lever to the gear selector lever.
Fit:
-
control system bolts
-
a new gasket for the control system cover. Note that the bolts are of different lengths (dimensions in mm)
Tighten the bolts alternately until loosely tightened. Then tighten alternately to 10 Nm .
Supplementary work
Fit the cable harness. Plug in the solenoid connectors.
Fit the oil temperature sensor, securing it with the bolt. Note that the bolt length is in (mm). Tighten to 10 Nm .
Attach the cable harness to the holder. Check that the cable harness is correctly positioned.
Refit as described in Replacement of control system cable harness with oil temperature sensor See: Sensors and Switches - Transmission and
Drivetrain/Sensors and Switches - A/T/Transmission Temperature Sensor/Switch/Service and Repair/Replacement Of Control System Cable Harness
With Oil Temperature Sensor and Replacement of control system cable harness with oil temperature sensor See: Sensors and Switches - Transmission
and Drivetrain/Sensors and Switches - A/T/Transmission Temperature Sensor/Switch/Service and Repair/Replacement Of Control System Cable Harness
With Oil Temperature Sensor.
