S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
Driver/Vehicle Information Display: Scan Tool Testing and Procedures
Description of Parameters
Description Of Parameters
VEHICLE SPEED
Measurement range 0-260 km/h, 0-160 mph.
The value displays the vehicle speed. The signal is from the ABS control module.
ENGINE SPEED (RPM)
Measurement range 0-9024 rpm.
The value indicates the engine speed (RPM). This is a signal from the engine control module (ECM).
ENGINE COOLANT TEMPERATURE
Measurement range -40 to +140°C.
The value indicates the engine coolant temperature (ECT). This is a signal from the engine control module (ECM).
OUTSIDE TEMPERATURE
NOTE: If the combined instrument panel is programmed to display the temperature in °C (°F), the read out of the value in °F (°C) will not be correct.
Measurement range -40 to +60°C/-40 to +140 °F.
The value indicates the ambient air temperature. This is a signal from the sensor.
NOTE: Only if the car is equipped with a function displaying the outside temperature.
MANIPULATED
The value indicates how long in hours the speedometer signal to the combined instrument panel has been disengaged while the car was being driven.
FUEL VOLUME, ATTENUATED
NOTE: If the combined instrument panel is programmed to display the volume in liters(gallons), the read out of the value in gallons (liters) will not be
correct.
Fuel level signal, attenuated (liters/gallons).
The value shows the volume signal from the fuel level sensor (gasoline/diesel).
FUEL VOLUME, CALCULATED