S40 L4-1.9L Turbo VIN 29 B4204T3 (2001)
NOTE: If the combined instrument panel is programmed to display the volume in liters(gallons), the read out of the value in gallons (liters) will not be
correct.
Fuel level signal, calculated (liters/gallons).
The value displays the volume calculated by the combined instrument panel from the fuel level sensor signal (gasoline/diesel).
GAS VOLUME, ATTENUATED
Gas level signal, attenuated (liters/gallons).
The value displays the volume calculated by the combined instrument panel from the fuel level sensor signal.
NOTE: Only applies to bi-fuel cars.
GAS VOLUME, CALCULATED
Gas level signal, calculated (liters/gallons).
The value displays the gas volume signal from the gas level sensor.
NOTE: Only applies to bi-fuel cars.
GAS FUEL FINISHED, STATUS
The value indicates the status of the combined instrument panel for the gas level in the fuel tank. This data is sent to the LPG control module. When the
gas level is low and the LPG control module receives a signal indicating this from combined instrument panel terminal #B12, gas power is switched off
and the engine switches to gasoline power. Approximately 5 liters and less is considered as low level. Gas power is available when the gas level is above
the minimum level.
Yes = Gas level finished (low level or less).
No = Gas level OK (above low level).
NOTE: Only applies to bi-fuel cars.
CLOCK ADJUSTMENT KNOB STATUS
The value displays the clock adjustment knob position for adjusting time.
Resting position = No time adjustment.
Forward slow = Adjusting time, forward slowly.
Forward medium = Adjusting time, forward medium.
Forward fast = Adjusting time, forward fast.
Backward slow = Adjusting time, backward slowly.
Backward medium = Adjusting time, backward medium.
Backward fast = Adjusting time, backward fast.
TRIP COMPUTER, SET BUTTON
NOTE: Only model years 1999 and 2000.
Not depressed = Button released.
Depressed = Button depressed.
The value indicates the position of the reset button for the trip computer.
NOTE: Only if the car is equipped with a trip computer function.
TRIP COMPUTER, RESET BUTTON
Not depressed = Button released.
Depressed = Button depressed.
The value indicates the position of the reset button for the trip computer.
NOTE: Only if the car is equipped with a trip computer function.
TRIP COMPUTER, SELECTOR