S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Clean the area on the microphone and headlining panel as illustrated, which corresponds to the size of the double-sided adhesive tape. Use a
solution of 25% isopropanol and 75% water, as well as a lint free cloth.
Dry with care, do not rub.
-
Allow to dry.
Note! In cases where the area is heavily soiled or treated with cockpit shine. First clean using a washing up detergent (FAIRY or similar).
-
Remove the backing tape from one side of the Velcro strip and press it onto the microphone.
-
Remove the remaining backing tape from the Velcro strip and press the microphone securely onto the ceiling panel as illustrated.
Note! Direct the microphone towards the driver.
-
Feed in any cable excess.
-
Route the cable to the A-pillar and onwards to the glove compartment.
-
Take three small tie straps from the kit and secure the cable at the A-pillar as illustrated.
-
Refit the sun visor mountings.
-
Reinstall the A pillar panel and weatherstrip.