S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
Installing the control panel
-
Clean the area on the center console as illustrated, which corresponds to the size of the double-sided adhesive tape. Use a solution of 25%
isopropanol and 75% water, as well as a lint free cloth.
Dry with care, do not rub.
-
Allow to dry.
Note! In cases where the area is heavily soiled or treated with cockpit shine. First clean using a washing up detergent (FAIRY or similar).
Only applies to Right-hand vehicles
-
Place the control panel cable in the groove as illustrated.
-
Remove the protective film on the control panel and press in position as illustrated.
