S40 2.4i L5-2.4L VIN 38 B5244S4 (2008)
-
Press the cable securely into the compartment that is in the joint between the front and rear side of the center console. Stop level with the lower
edge of the display opening.
-
Route the cable from the control panel on the right-hand side of the centre console.
-
Reinstall the tunnel console, but do not slide it forward so far that it covers the rear screw holes for the centre console's panel.
-
Plug in the connectors at the leading edge.
Note! Protect the hand brake and gear shift when fitting the tunnel console.
